

Published: xxx

--------------------------------------------------------------------------
TITLE: TelematicFix21     Build no 3837
--------------------------------------------------------------------------
This package applies to:

MRS 5.10/5.11/5.12  / XPR 3.0 CD
 
--------------------------------------------------------------------------
 
Package Type:
=============

[ ]	severe / severe isolated
[ ]	important / important isolated
[X]	unique isolated


Fixes
=====

 
1.) New in this package: 

TelematicFix21
- BR031210160358, IsdnApl
  Calling number was not normalized in call transfer case
  even if type of number international is selected

- BR031126164431, IsdnApl
  Set the default value "CheckPageNumbers" from 0 to 1, to avoid "OK send 0 pages"

- BR031127121716, IpApl 
  IpApl did not play compressed wave file

- BR031107144846, DlgApl
  Endless h323dbg.txt logfile with DMF/300 Faxboards



2.) Previously published fixes included in this package:

TelematicFix20
- BR031128093526, DlgApl
  Active connections are dropped when layer 2 of the ISDN link goes down. 
  This fixes the problem that the complete link remains in state "out of service" when layer 2 goes up again.

TelematicFix19
- BR031107113704-Doug German, IPAPL
  Stuck SUBLINE events in XPR Monitor are related to callers dialing non existing number in the PBX

TelematicFix18
- BR031111100509-Nico Frster, SAG: NA00460120, Prio2, IsdnApl + CTILIGHT and executive/secretary combination
  This problem has been fixed with the new Eicon driver (V.12-103-24), that included in this package
- BR031124090636-Michael Fendrich, IsdnApl crashes after update from mrs 5.10 to 5.12


TelematicFix17
- BR031117162745-Nico Frster, SAG: wrong normalisation with Type Of Number international / Isdn
- BR031119160358-Nico Frster, SAG: Dynamic problems with new IsdnApl Fix 16 (Build 5.12.4.3821)


TelematicFix16
- SAG, BR031113163022-Thomas Hein, sattelites are crashing


TelematicFix15
- BR031110105802-KKA unable to find matching mailbox for incoming fax message using ISDNApl


TelematicFix14
- BR031023142410, MaxRedirLength is not working anymore with Ergo 5.11


TelematicFix13
- BR030915102400, IsdnApl crash
- BR031007080904, Incorrect normalization of the Recipient number (MRS 5.01->working; MRS 5.11->not working)


TelematicFix12
- BR031008215358 Playing Voice messages on DECT phones causes the phones to crash


TelematicFix11
- BR030522125729 Transfer out to unreachable destination leads to a dropped call (DSE / Rolm 9751)
- Simulate DISCONNECT_B3_IND when INFO_IND is received with disconnect event and the B channel is active


TelematicFix10
- BR030917132438 IsdnApl on satellit is not stopping properly when network connection to main system is broken
- BR030909103249 MTA: conversion of multipart mails routed to VOICE


TelematicFix9
- BR030903101043 (IPAPL) MWI does not work after update from MRS 5.02 to MRS 5.11
  Resolve: MWI is now handled using lineDevSpecific, the 2 MWI set and reset numbers are therefore not needed any longer 

- BR030826135600 (IPAPL) The IpApl tries to open all CTI ports including those, that were configured for use with Cisco softphones
  Resolve: Add the following string CTIPort=<XXX> into the Private value of the registry key SOFTWARE\PP-COM\MRS\IpApl\Devices\<#ID of Cisco TSP> 
           so that the IpApl opens only CTI ports, whose device name includes XXX.


TelematicFix8
- Vms	BR030725093633	CCNR/CCBS does not work for VMS
- Vms	BR030723151302	VMS script - wrong anouncement on transfer call


TelematicFix6
- BR030522120742, isdnapl crashed with dr watson
- BR030604093816, SAG: Crash of ISDNAPL build 3615


Enhancements
============

1.) New in this package:

- IpApl now supports busy announcement in H.323 connectivity


Installation
============

 - Stop the MRS/Xpressions server
 - Replace the *.EXE in folder ..\mrs\bin or ..\xpr\bin
 - Replace the *.dll in folder ..\mrs\monitor or ..\xpr\monitor
 - Start the MRS/Xpressions server again.



Disclaimer
==========

This package contains fixes and/or enhancements to previously released software. It is supported, but has not been regression-tested.
It should be applied only to systems experiencing the symptoms stated above.
Unless you are severely impacted by these specific symptoms, Cycos recommends that you wait for the next Service Pack, or release, that contains fully regression tested fixes and enhancements. 
Enhancements might need additional license keys.
Contact Cycos Support hotline for more information.

THE INFORMATION PROVIDED IN THIS RELEASE NOTES IS PROVIDED
"AS IS" WITHOUT WARRANTY OF ANY KIND. CYCOS DISCLAIMS ALL WARRANTIES,
EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL CYCOS AG
OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT,
INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL
DAMAGES, EVEN IF CYCOS AG OR ITS SUPPLIERS HAVE BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE
FOREGOING LIMITATION MAY NOT APPLY.

