<parameter_def deviceType="T942C" parameterVersion="1.00.5" protocolVersion="2.0.13" pclWriteStartAddr="0" pclWriteLength="BFF">
        <capabilities>
                <incomingMessageBuffer maxSize="100000"/>
        </capabilities>
        <parameters>
                <group name="Licence">
                        <parameter name="License">
                                <!-- memoryAddress:00E6 -->
                                <!-- memoryLength:8 -->
                                <symbolicName>License</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="0000000000000000">
                                                <hexArrayPresentation maxLength="16" minLength="16"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Licence Code. Permitted digits: 0-F.</fullHelpText>
                        </parameter>
                </group>

                <group name="General Parameters">
                        <parameter name="Prefix and call number range">
                                <!-- memoryAddress:0110 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>PrefixCallNumberRange</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="DDDDDEEE">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-E, where E is used as a wild card. Default: DDDDDEEE. (Prefix: DDDDD, call no range: 000 - 999, including ----)</fullHelpText>
                        </parameter>

                        <parameter name="Number of digits in T900 paging address">
                                <!-- memoryAddress:0114 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>NumberDigits900PagAddr</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="3">
                                                <enumPresentation>
                                                        <element name="0">0</element>
                                                        <element name="1">1</element>
                                                        <element name="2">2</element>
                                                        <element name="3">3</element>
                                                        <element name="4">4</element>
                                                        <element name="5">5</element>
                                                        <element name="6">6</element>
                                                        <element name="7">7</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Number of digits in T900 paging address. Range 01H - 07H. Default: 3 </fullHelpText>
                        </parameter>

                        <parameter name="Site ID is used to identify the site from Win900">
                                <!-- memoryAddress:0115 -->
                                <!-- memoryLength:20 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>SiteID</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="20" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Site ID is used to identify the site from Win900. Normally Site ID is the name of the site (e.g. Ascom Tateco AB).</fullHelpText>
                        </parameter>

                        <parameter name="Preamble length 900-code">
                                <!-- memoryAddress:0129 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>PreambleLength</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="no preamble">0</element>
                                                        <element name="0.5 seconds preamble">1</element>
                                                        <element name="2.0 seconds preamble">2</element>
                                                        <element name="5.0 seconds preamble">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Length of preamble before transmission of pagings. This parameter must correspond to the battery saving time in the pocket unit.</fullHelpText>
                        </parameter>

                        <parameter name="Booster activation">
                                <!-- memoryAddress:012B -->
                                <!-- memoryLength:1 -->
                                <symbolicName>BoosterActivation</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No booster activation">0</element>
                                                        <element name="On alarm priority 1">1</element>
                                                        <element name="On high priority 2">2</element>
                                                        <element name="On high priority 3">3</element>
                                                        <element name="On high priority 4">4</element>
                                                        <element name="On normal priority 5">5</element>
                                                        <element name="On normal priority 6">6</element>
                                                        <element name="On normal priority 7">7</element>
                                                        <element name="On normal priority 8">8</element>
                                                        <element name="On normal priority 9">9</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Lowest paging priority to activate booster control output.</fullHelpText>
                        </parameter>

                        <parameter name="Frequency locked system">
                                <!-- memoryAddress:012C -->
                                <!-- memoryLength:1 -->
                                <symbolicName>FrequencyLocked</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No FL-transmitters">0</element>
                                                        <element name="Only 900 pagings">1</element>
                                                        <element name="Both 800 and 900 pagings">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; If this is a system with frequency locked transmitters, type of pagings that are sent by these transmitters must be specified.</fullHelpText>
                        </parameter>

                        <parameter name="Number of centrals on C-Bus">
                                <!-- memoryAddress:012D -->
                                <!-- memoryLength:1 -->
                                <symbolicName>NumberCentralsOnCBus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <decimalPresentation maxValue="16" minValue="1"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Number of centrals connected on C-bus including this central.</fullHelpText>
                        </parameter>

                        <parameter name="Synchronization of transmitter sequences between centrals">
                                <!-- memoryAddress:012E -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SyncTransSeq</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Should transmitter sequences be synchronized between centrals on C-bus?</fullHelpText>
                        </parameter>

                        <parameter name="Monitor input">
                                <!-- memoryAddress:012F -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MonitorInput</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Ignore monitor input">0</element>
                                                        <element name="Use monitor input">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; This parameter controls use of monitor input. When monitor input is used, no pagings will be sent while monitor input is active. This parameter is normally set only when a monitor receiver (e.g. H/U989M ) is connected to the monitor input.</fullHelpText>
                        </parameter>

                        <parameter name="Beep at each transmission">
                                <!-- memoryAddress:0130 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>BeepEachTrans</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText></fullHelpText>
                        </parameter>
                </group>
                <group name="Buses">

                        <parameter name="Bit rate on bus A">
                                <!-- memoryAddress:0140 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>BitRateABus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="1200 bps">0</element>
                                                        <element name="9600 bps">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText></fullHelpText>
                        </parameter>

                        <parameter name="Modem delay time on bus A">
                                <!-- memoryAddress:0141 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ModemDelayABus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <decimalPresentation maxValue="100" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Total delay time introduced by modems on the A-bus. (Total delay time = Two times the maximum delay time in one direction) Unit 10ms. Permitted values 0 - 100 i.e. 0 - 1000 ms. Use 40ms for a 938D/A pair.</fullHelpText>
                        </parameter>

                        <parameter name="Bit rate on bus B">
                                <!-- memoryAddress:0142 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>BitRateBBus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="1200 bps">0</element>
                                                        <element name="9600 bps">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText></fullHelpText>
                        </parameter>

                        <parameter name="Modem delay time on bus B">
                                <!-- memoryAddress:0143 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ModemDelayBBus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <decimalPresentation maxValue="100" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Total delay time introduced by modems on the B-bus. (Total delay time = Two times the maximum delay time in one direction) Unit 10ms. Permitted values 0 - 100 i.e. 0 - 1000 ms. Use 40ms for a 938D/A pair.</fullHelpText>
                        </parameter>

                        <parameter name="Bit rate on bus C">
                                <!-- memoryAddress:0144 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>BitRateCBus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="1200 bps">0</element>
                                                        <element name="9600 bps">1</element>
                                                        <element name="2400 bps">2</element>
                                                        <element name="4800 bps">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Not applicable for T942C/2</fullHelpText>
                        </parameter>

                        <parameter name="Parity on bus C">
                                <!-- memoryAddress:0145 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ParityCBus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="No Parity">0</element>
                                                        <element name="Odd Parity">1</element>
                                                        <element name="Even Parity">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Not applicable for T942C/2</fullHelpText>
                        </parameter>

                        <parameter name="Modem delay time on bus C">
                                <!-- memoryAddress:0146 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ModemDelayCBus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <decimalPresentation maxValue="100" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Total delay time introduced by modems on the C-bus. (Total delay time = Two times the maximum delay time in one direction) Unit 10ms. Permitted values 0 - 100 i.e. 0 - 1000 ms.</fullHelpText>
                        </parameter>

                        <parameter name="Modem delay time on bus D">
                                <!-- memoryAddress:0147 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ModemDelayDBus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <decimalPresentation maxValue="100" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Total delay time introduced by modems on the D-bus. (Total delay time = Two times the maximum delay time in one direction) Unit 10ms. Permitted values 0 - 100 i.e. 0 - 1000 ms. Use 40ms for a 938D/D pair.</fullHelpText>
                        </parameter>

                        <parameter name="Bit rate on PC-Line">
                                <!-- memoryAddress:0148 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>BitRatePCLine</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="3">
                                                <enumPresentation>
                                                        <element name="1200 bps">0</element>
                                                        <element name="2400 bps">1</element>
                                                        <element name="4800 bps">2</element>
                                                        <element name="9600 bps">3</element>
                                                        <element name="19200 bps">4</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Not applicable for T942C/2</fullHelpText>
                        </parameter>

                        <parameter name="Parity on PC-Line">
                                <!-- memoryAddress:0149 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ParityPCLine</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="3">
                                                <enumPresentation>
                                                        <element name="No Parity">2</element>
                                                        <element name="Even Parity">3</element>
                                                        <element name="Odd Parity">4</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Not applicable for T942C/2</fullHelpText>
                        </parameter>

                        <parameter name="Modem connected to PC-Line">
                                <!-- memoryAddress:014A -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ModemPCLine</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No modem connected">0</element>
                                                        <element name="Modem connected">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Set this parameter if PC-line is connected to a modem.</fullHelpText>
                        </parameter>
                </group>

                <group name="Passwords">

                        <parameter name="System password">
                                <!-- memoryAddress:0168 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>SysPassWord</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <customPresentation maxLength="4" minLength="0" pattern="[A-Z0-9\\-]*"/>
                                        </string>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText/>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; 4 characters. All four characters must be set if password shall be used. Permitted characters: ASCII '0'-'9', 'A'-'Z'. '-' is used as wildcard. Leave empty if system password shall not be sent to modules. Default: No system password will be sent. </fullHelpText>
                        </parameter>

                        <parameter name="User password">
                                <!-- memoryAddress:016C -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>UserPassWord</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <customPresentation maxLength="4" minLength="0" pattern="[A-Z0-9\\-]*"/>
                                        </string>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText/>
                                <fullHelpText>4 characters. All four characters must be set if password shall be used. Permitted characters: ASCII '0'-'9', 'A'-'Z'. '-' is used as wildcard. Leave empty if system password shall not be sent to modules. Default: No system password will be sent. </fullHelpText>
                        </parameter>

                </group>

                <group name="Display Message Parameters">

                        <parameter name="Call diversion display message">
                                <!-- memoryAddress:0190 -->
                                <!-- memoryLength:8 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>CDMsg</symbolicName>
                                <dataFormat>
                                        <string defaultValue="/%">
                                                <stringPresentation maxLength="8" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText/>
                                <fullHelpText>When parameter 'ADD CALL DIVERSION DISPLAY MESSAGE' (see parameters for RX-categories) is set, the text specified below is added to the the display message when a call diversion takes place.&lt;br&gt;&lt;br&gt; Permitted characters: ASCII characters according to IBM OEM. Not all characters are displayable. '%' has a special meaning. The original call number can be included in text by writing a '%'- character in the position where the call number is to be inserted.&lt;br&gt;&lt;br&gt; Optionally the '%'-character may be followed by a digit (0-8), specifying number of digits in call number to be displayed. When the digit is omitted, the call number will be displayed according to the parameter 'NUMBER OF DIGITS IN T900 PAGING ADDRESS'.</fullHelpText>
                        </parameter>

                        <parameter name="Real time display message">
                                <!-- memoryAddress:0198 -->
                                <!-- memoryLength:18 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RTMsg</symbolicName>
                                <dataFormat>
                                        <string defaultValue=" %H.%I">
                                                <stringPresentation maxLength="18" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText/><fullHelpText>(Not applicable for T942C/2)&lt;br&gt; When parameter 'ADD REAL TIME DISPLAY MESSAGE' (see parameters for RX-categories) is set, central will add date and/or time to original display message according to the format string specified below.&lt;br&gt;&lt;br&gt; Permitted characters: ASCII characters according to IBM OEM. Not all characters are displayable. '%' has a special meaning.&lt;br&gt;&lt;br&gt; By specifying a %-character followed by a 'Y', 'M', 'D', 'H', 'I'or 'S' -character according to the table below. Year, month, day, hour, minute and second of time when paging was sent will be added to the original display message.&lt;br&gt;&lt;br&gt; %Y Will be replaced by current year.&lt;br&gt; %M Will be replaced by current month.&lt;br&gt; %D Will be replaced by current day.&lt;br&gt; %H Will be replaced by current hour.&lt;br&gt; %I Will be replaced by current minute.&lt;br&gt; %S Will be replaced by current second.</fullHelpText>
                        </parameter>

                        <parameter name="Word wrap break parameter">
                                <!-- memoryAddress:01AA -->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrap</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="2 characters">2</element>
                                                        <element name="3 characters">3</element>
                                                        <element name="4 characters">4</element>
                                                        <element name="5 characters">5</element>
                                                        <element name="6 characters">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If a word is long enough to advance to a new line, this parameter decides how many characters are to be placed on the first line. If the number of characters on the first line is less or equal to this parameter the whole word is moved to the next line. The number of characters on the second line is always at least two characters despite of the parameter. The parameter is only valid when the category parameter for Word Wrap is enabled. </fullHelpText>
                        </parameter>
                </group>

                <group name="Special Parameters">

                        <parameter name="Paging to non existing paging numbers">
                                <!-- memoryAddress:01D0 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>PagNonExist</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Do not accept non existing numbers">0</element>
                                                        <element name="Accept non existing numbers">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter decides whether or not pagings to numbers that do not exist in the database of the central are to be accepted</fullHelpText>
                        </parameter>

                        <parameter name="Acknowledge pagings from old 940am">
                                <!-- memoryAddress:01D2 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AckPag940am</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Do not handle acknowledge pagings from old 940AM">0</element>
                                                        <element name="Handle acknowledge pagings from old 940AM">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter must be set if acknowledge pagings from 940AM with software version older than V7.5 is to be handled by the central.</fullHelpText>
                        </parameter>

                        <parameter name="Mobile unit compatibility">
                                <!-- memoryAddress:01D3 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MobUnitComp</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No compatibility">0</element>
                                                        <element name="Compatibility">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If U910E, U921, or 910T with serial numbers according to technical news no 75 are used, this parameter should be set to 'Compatibility'. Note. Setting this parameter will some what decrease the transmission capacity. To avoid this, a battery saving time of 0.5 seconds is recommended.</fullHelpText>
                        </parameter>

                        <parameter name="910T standby mode compatibility">
                                <!-- memoryAddress:01D4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>910TStandbyComp</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No compatibility">0</element>
                                                        <element name="Compatibility">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If any 910T with serial numbers according to technical news no 75 are used, this parameter should be set to 'Compatibility'</fullHelpText>
                        </parameter>

                        <parameter name="Call number for test pagings">
                                <!-- memoryAddress:01D5 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoTestPag</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="DDDDE000">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Call number for test pagings generated by this central. Permitted digits: 0-E, where E is used as a wild card.</fullHelpText>
                        </parameter>

                        <parameter name="Beep code for test pagings">
                                <!-- memoryAddress:01D9 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>BeepTestPag</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Beep code 1">1</element>
                                                        <element name="Beep code 2">2</element>
                                                        <element name="Beep code 3">3</element>
                                                        <element name="Beep code 4">4</element>
                                                        <element name="Beep code 5">5</element>
                                                        <element name="Beep code 6">6</element>
                                                        <element name="Beep code 7">7</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Beep code 1 - 7</fullHelpText>
                        </parameter>

                        <parameter name="Broadcast absence status on A-bus">
                                <!-- memoryAddress:01DA -->
                                <!-- memoryLength:1 -->
                                <symbolicName>BCAbsenceStat</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Do not send with broadcast">0</element>
                                                        <element name="Send with broadcast">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Set this parameter to 'Send with broadcast' if absence status block shall be sent with broadcast on A-bus. All types of absence status will be sent.</fullHelpText>
                        </parameter>
                </group>

                <group name="912/914/922/a71/p71 Parameters">

                        <parameter name="Out of range check pagings">
                                <!-- memoryAddress:0200 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>OutOfRangePag</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <decimalPresentation maxValue="255" minValue="1"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter specifies how often (in minutes) Out of range check pagings are to be sent. Recommended value is to allow three Out of Range pagings before timeout programmed in pager. Permitted values: 1-60 minutes. 255 = Out of range check pagings will not be sent.</fullHelpText>
                        </parameter>

                        <parameter name="Set clock pagings">
                                <!-- memoryAddress:0201 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ClockPag</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <decimalPresentation maxValue="255" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; This parameter specifies how often (in hours) Set clock pagings are to be sent. Permitted values: 0-24 hours. 255 = Set clock pagings will not be sent</fullHelpText>
                        </parameter>

                        <parameter name="Group call number range, lower limit">
                                <!-- memoryAddress:0203 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>GrpRngLowLimit</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Mainly of interest in small systems where number planning is made by call number ranges. If number planning is made from Win900, these parameters do not need to be set. Pagings sent to a number within a group call number range, will also be sent to storage rack. Permitted digits: 0-9 and F, where F is used for unused positions.</fullHelpText>
                        </parameter>

                        <parameter name="Group call number range, upper limit">
                                <!-- memoryAddress:0207 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>GrpRngUpLimit</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Mainly of interest in small systems where number planning is made by call number ranges. If number planning is made from Win900, these parameters do not need to be set. Pagings sent to a number within a group call number range, will also be sent to storage rack. Permitted digits: 0-9 and F, where F is used for unused positions.</fullHelpText>
                        </parameter>
                </group>

                <group name="Number Planning By Call Number Ranges - 1">

                        <parameter name="Call number range - lower limit">
                                <!-- memoryAddress:0320 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeLowLimit1</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="Call number range - upper limit">
                                <!-- memoryAddress:0324 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeUpLimit1</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="RX-Category">
                                <!-- memoryAddress:0328 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CallNoRangeRXCat1</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="RX-category A">0</element>
                                                        <element name="RX-category B">1</element>
                                                        <element name="RX-category C">2</element>
                                                        <element name="RX-category D">3</element>
                                                        <element name="RX-category E">4</element>
                                                        <element name="RX-category F">5</element>
                                                        <element name="RX-category G">6</element>
                                                        <element name="RX-category H">7</element>
                                                        <element name="RX-category I">8</element>
                                                        <element name="RX-category J">9</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>A paging to a number within the above specified call number range, will be transmitted according to this category.</fullHelpText>
                        </parameter>
                </group>

                <group name="Number Planning By Call Number Ranges - 2">

                        <parameter name="Call number range - lower limit">
                                <!-- memoryAddress:0330 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeLowLimit2</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="Call number range - upper limit">
                                <!-- memoryAddress:0334 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeUpLimit2</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="RX-Category">
                                <!-- memoryAddress:0338 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CallNoRangeRXCat2</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="RX-category A">0</element>
                                                        <element name="RX-category B">1</element>
                                                        <element name="RX-category C">2</element>
                                                        <element name="RX-category D">3</element>
                                                        <element name="RX-category E">4</element>
                                                        <element name="RX-category F">5</element>
                                                        <element name="RX-category G">6</element>
                                                        <element name="RX-category H">7</element>
                                                        <element name="RX-category I">8</element>
                                                        <element name="RX-category J">9</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>A paging to a number within the above specified call number range, will be transmitted according to this category.</fullHelpText>
                        </parameter>
                </group>

                <group name="Number Planning By Call Number Ranges - 3">

                        <parameter name="Call number range - lower limit">
                                <!-- memoryAddress:0340 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeLowLimit3</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="Call number range - upper limit">
                                <!-- memoryAddress:0344 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeUpLimit3</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="RX-Category">
                                <!-- memoryAddress:0348 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CallNoRangeRXCat3</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="RX-category A">0</element>
                                                        <element name="RX-category B">1</element>
                                                        <element name="RX-category C">2</element>
                                                        <element name="RX-category D">3</element>
                                                        <element name="RX-category E">4</element>
                                                        <element name="RX-category F">5</element>
                                                        <element name="RX-category G">6</element>
                                                        <element name="RX-category H">7</element>
                                                        <element name="RX-category I">8</element>
                                                        <element name="RX-category J">9</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>A paging to a number within the above specified call number range, will be transmitted according to this category.</fullHelpText>
                        </parameter>
                </group>

                <group name="Number Planning By Call Number Ranges - 4">

                        <parameter name="Call number range - lower limit">
                                <!-- memoryAddress:0350 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeLowLimit4</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="Call number range - upper limit">
                                <!-- memoryAddress:0354 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeUpLimit4</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="RX-Category">
                                <!-- memoryAddress:0358 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CallNoRangeRXCat4</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="RX-category A">0</element>
                                                        <element name="RX-category B">1</element>
                                                        <element name="RX-category C">2</element>
                                                        <element name="RX-category D">3</element>
                                                        <element name="RX-category E">4</element>
                                                        <element name="RX-category F">5</element>
                                                        <element name="RX-category G">6</element>
                                                        <element name="RX-category H">7</element>
                                                        <element name="RX-category I">8</element>
                                                        <element name="RX-category J">9</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>A paging to a number within the above specified call number range, will be transmitted according to this category.</fullHelpText>
                        </parameter>
                </group>

                <group name="Number Planning By Call Number Ranges - 5">

                        <parameter name="Call number range - lower limit">
                                <!-- memoryAddress:0360 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeLowLimit5</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="Call number range - upper limit">
                                <!-- memoryAddress:0364 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>CallNoRangeUpLimit5</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Permitted digits: 0-9 and F, where F is used for unused positions. For unused number ranges, all positions must be set to FF. </fullHelpText>
                        </parameter>

                        <parameter name="RX-Category">
                                <!-- memoryAddress:0368 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CallNoRangeRXCat5</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="RX-category A">0</element>
                                                        <element name="RX-category B">1</element>
                                                        <element name="RX-category C">2</element>
                                                        <element name="RX-category D">3</element>
                                                        <element name="RX-category E">4</element>
                                                        <element name="RX-category F">5</element>
                                                        <element name="RX-category G">6</element>
                                                        <element name="RX-category H">7</element>
                                                        <element name="RX-category I">8</element>
                                                        <element name="RX-category J">9</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>A paging to a number within the above specified call number range, will be transmitted according to this category.</fullHelpText>
                        </parameter>
                </group>

                <group name="Parameters For RX-Category A">

                        <parameter name="Description">
                                <!-- memoryAddress:03A0 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionA</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:03B0 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:03B1 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:03B3 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:03B4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:03B5 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModA</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:03B7 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:03B8 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:03BA -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0A</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:03BB-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1A</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:03BC-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2A</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:03BD-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3A</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:03BE-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4A</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:03BF-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5A</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:03C0-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6A</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:03C3-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:03CB-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:03CC-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:03CD-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackA</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>

                <group name="Parameters For RX-Category B">

                        <parameter name="Description">
                                <!-- memoryAddress:03D0 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionB</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:03E0 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:03E1 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:03E3 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:03E4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:03E5 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModB</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:03E7 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:03E8 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:03EA -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0B</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:03EB-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1B</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:03EC-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2B</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:03ED-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3B</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:03EE-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4B</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:03EF-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5B</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:03F0-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6B</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:03F3-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:03FB-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:03FC-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:03FD-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackB</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>

                <group name="Parameters For RX-Category C">

                        <parameter name="Description">
                                <!-- memoryAddress:0400 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionC</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:0410 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:0411 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:0413 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:0414 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:0415 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModC</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:0417 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:0418 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:041A -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0C</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:041B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1C</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:041C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2C</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:041D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3C</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:041E-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4C</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:041F-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5C</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:0420-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6C</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:0423-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:042B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:042C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:042D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackC</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>

                <group name="Parameters For RX-Category D">

                        <parameter name="Description">
                                <!-- memoryAddress:0430 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionD</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:0440 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:0441 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:0443 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:0444 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:0445 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModD</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:0447 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:0448 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:044A -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0D</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:044B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1D</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:044C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2D</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:044D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3D</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:044E-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4D</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:044F-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5D</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:0450-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6D</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:0453-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:045B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:045C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:045D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackD</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>

                <group name="Parameters For RX-Category E">

                        <parameter name="Description">
                                <!-- memoryAddress:0460 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionE</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:0470 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:0471 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:0473 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:0474 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:0475 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModE</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:0477 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:0478 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:047A -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0E</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:047B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1E</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:047C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2E</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:047D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3E</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:047E-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4E</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:047F-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5E</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:0480-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6E</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:0483-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:048B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:048C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:048D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackE</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>

                <group name="Parameters For RX-Category F">

                        <parameter name="Description">
                                <!-- memoryAddress:0490 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionF</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:04A0 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:04A1 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:04A3 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:04A4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:04A5 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:04A7 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:04A8 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:04AA -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0F</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:04AB-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1F</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:04AC-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2F</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:04AD-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3F</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:04AE-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4F</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:04AF-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5F</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:04B0-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6F</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:04B3-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:04BB-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:04BC-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:04BD-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackF</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>
                <group name="Parameters For RX-Category G">

                        <parameter name="Description">
                                <!-- memoryAddress:04C0 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionG</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:04D0 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:04D1 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:04D3 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:04D4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:04D5 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModG</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:04D7 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:04D8 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:04DA -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0G</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:04DB-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1G</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:04DC-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2G</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:04DD-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3G</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:04DE-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4G</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:04DF-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5G</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:04E0-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6G</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:04E3-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:04EB-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:04EC-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:04ED-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackG</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>

                <group name="Parameters For RX-Category H">

                        <parameter name="Description">
                                <!-- memoryAddress:04F0 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionH</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:0500 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:0501 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:0503 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:0504 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:0505 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModH</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:0507 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:0508 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:050A -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0H</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:050B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1H</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:050C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2H</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:050D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3H</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:050E-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4H</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:050F-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5H</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:0510-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6H</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:0513-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:051B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:051C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:051D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackH</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>

                <group name="Parameters For RX-Category I">

                        <parameter name="Description">
                                <!-- memoryAddress:0520 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionI</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:0530 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:0531 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:0533 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:0534 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:0535 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModI</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:0537 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:0538 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:053A -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0I</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:053B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1I</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:053C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2I</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:053D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3I</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:053E-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4I</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:053F-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5I</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:0540-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6I</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:0543-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:054B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:054C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:054D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackI</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>

                <group name="Parameters For RX-Category J">

                        <parameter name="Description">
                                <!-- memoryAddress:0550 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>RXDescriptionJ</symbolicName>
                                <dataFormat>
                                        <string defaultValue="Not defined">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Description of category. (Free text).</fullHelpText>
                        </parameter>

                        <parameter name="Max. display length">
                                <!-- memoryAddress:0560 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>MaxDispLenJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="120">
                                                <decimalPresentation maxValue="128" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Max. no. of characters to be sent in display message.</fullHelpText>
                        </parameter>

                        <parameter name="Character set">
                                <!-- memoryAddress:0561 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>CharSetJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910 character set">0</element>
                                                        <element name="910T character set">1</element>
                                                        <element name="912/914/922/a71/p71 character set">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify character set to be used for pagings to receivers of this category. This setting is only valid for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922/a71/p71).</fullHelpText>
                        </parameter>

                        <parameter name="Add call diversion display message">
                                <!-- memoryAddress:0563 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddCDMsgJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never">0</element>
                                                        <element name="Only if space">1</element>
                                                        <element name="Always">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specify when call diversion message may be added to original display message.&lt;br&gt;&lt;br&gt; By setting this parameter to a proper value, it is possible to let the central add information regarding the originally paged call-number to the original display message when a call diversion takes place. (Format of the call diversion message is specified in the parameter 'CALL DIVERSION DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; -Never add any call diversion message.&lt;br&gt; -Only add call diversion message at end of original message if there is enough space.&lt;br&gt; -Always add call diversion message at end of original message. (Original display message will be partly overwritten if call diversion message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Type of 900 code for paging transmissions">
                                <!-- memoryAddress:0564 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>Type900CodeJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="900 code, not only 912/914/922/a71/p71 receivers within this category.">0</element>
                                                        <element name="900 code">1</element>
                                                        <element name="Extended 900 code">2</element>
                                                        <element name="900 code at messages up to 16 characters. Extended 900 code at longer messages">3</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>912/914/922 receivers handle both "900 code" and "extended 900 code". Some 912/914/922 features such as Customized Groups need "extended 900 code".&lt;br&gt;&lt;br&gt; 910/911/920/921 receivers use the code format "900 code", they can not handle "extended 900 code". The setting 00H must be used.&lt;br&gt;&lt;br&gt; a71/p71 receivers use the code format "extended 900 code", they can not handle "900 code". The setting 02H must be used.&lt;br&gt;&lt;br&gt; In sites with 912/914/922 only, "extended 900 code" will give the shortest transmission time for a given display message. For sites with mainly 910 series it is recommeded to use "900 code" for 912/914/922 as well. This is because it takes time to switch between the different code formats.&lt;br&gt;&lt;br&gt; For parameter setting 01H, 02H and 03H pagings are never transmitted via radio if the pager is absent. This means that all pagers within this category must be 912/914/922/a71/p71, that are capable of receiving messages in storage/charging rack..)</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to other module">
                                <!-- memoryAddress:0565 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>SendPagOtherModJ</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If pagings to receivers of this category are to be sent to another module within this system (e.g a UniteCM), this module's bus and address must be specified here as in format BBMM. If no transfer of pagings to other module is desired, both bus and address must be set to FF. Permitted values for Bus: 00 = A-Bus 01 = B-Bus FFH = Do not send pagings to other module.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on C-bus">
                                <!-- memoryAddress:0567 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagCBUSJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent to other centrals?</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings on PC-line">
                                <!-- memoryAddress:0568 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagPCLineJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Are pagings to receivers of this category to be sent on PC-line?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 0">
                                <!-- memoryAddress:056A -->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq0J</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 1">
                                <!-- memoryAddress:056B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq1J</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 2">
                                <!-- memoryAddress:056C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq2J</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 3">
                                <!-- memoryAddress:056D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq3J</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 4">
                                <!-- memoryAddress:056E-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq4J</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 5">
                                <!-- memoryAddress:056F-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq5J</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="900-Sequence 6">
                                <!-- memoryAddress:0570-->
                                <!-- memoryLength:1 -->
                                <symbolicName>900Seq6J</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Not Permitted">0</element>
                                                        <element name="Permitted">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Is it permitted to send pagings to receivers of this catagory on this sequence?</fullHelpText>
                        </parameter>

                        <parameter name="Add real time display message">
                                <!-- memoryAddress:0573-->
                                <!-- memoryLength:1 -->
                                <symbolicName>AddRTDisMsgJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Never add">0</element>
                                                        <element name="Add to all pagings if space">1</element>
                                                        <element name="Add to all pagings">2</element>
                                                        <element name="Add to speech pagings if space">3</element>
                                                        <element name="Add to non speech pagings">4</element>
                                                        <element name="Add to all pagings if absent and space">5</element>
                                                        <element name="Add to all pagings if absent">6</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; By setting this parameter, it is possible to let the central add a 'real time display message' containing date and/or time of the paging to the original display message. (Format of the real time display message is specified in the parameter 'REAL TIME DISPLAY MESSAGE'.)&lt;br&gt;&lt;br&gt; Specify if/when real time message may be added to original display message. Real time message is always added at the end of the original message. &lt;br&gt;&lt;br&gt; -Never add real time message. &lt;br&gt; -Add real time message to all pagings if there is enough space. &lt;br&gt; -Always add real time message to all pagings. (Original display message will be partly overwritten if real time message does not fit in display.) &lt;br&gt; -Add real time message to non-speech pagings if there is enough space. &lt;br&gt; -Always add real time message to non-speech pagings. (Original display message will be partly overwritten if real timemessage does not fit in display.) &lt;br&gt; -Add real time message to all pagings if there is enough space and the receiver is absent. &lt;br&gt; -Always add real time message to all pagings when the receiver is absent. (Original display message will be partly overwritten if real time message does not fit in display.)</fullHelpText>
                        </parameter>

                        <parameter name="Pocket receivers display optimization">
                                <!-- memoryAddress:057B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>RecDispOptJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="2">
                                                <enumPresentation>
                                                        <element name="910T">0</element>
                                                        <element name="912/914/922/910T/910D">1</element>
                                                        <element name="912/914/922/910D">2</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>This parameter is only valid if "900 code" is selected in parameter "TYPE OF 900 CODE FOR PAGING TRANSMISSIONS".&lt;br&gt; The optimization is only made for pagings sent in the air and not to pagers in a charging or storage rack (912/914/922). &lt;br&gt;&lt;br&gt; The parameter controls which pocket receiver within this category the central shall be optimized for.&lt;br&gt;&lt;br&gt; 910T&lt;br&gt; This setting results in correct message formatting for 910T only. Both 912/914/922 and 910D will have incorrect message formatting, shown as incorrect number of "spaces", totally empty pages might show up. 910D might as well display a strange character at the end of the message. Line lenght is 16 character.&lt;br&gt;&lt;br&gt; 912/914/922/910T/910D&lt;br&gt; A compromise that uses carriage returns to get compatibility between 910T and 912/914/922. A carriage return is added every 13 characters. In 910D this show up as a strange character. Line length is 12 characters. Maximum 8 lines, 96 characters per message.&lt;br&gt;&lt;br&gt; 912/914/922/910D&lt;br&gt; This setting results in correct message formatting for 912/914/922 receivers and shall be used unless 910T receivers are used. The 910D receiver will be working correctly showing the first 16 characters of the message. The central does not set line length.</fullHelpText>
                        </parameter>

                        <parameter name="Word Wrap (hyphenation)">
                                <!-- memoryAddress:057C-->
                                <!-- memoryLength:1 -->
                                <symbolicName>WordWrapJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>

                        <parameter name="Send pagings to storage rack">
                                <!-- memoryAddress:057D-->
                                <!-- memoryLength:1 -->
                                <symbolicName>SendPagStoreRackJ</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="No">0</element>
                                                        <element name="Yes">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>If this parameter is set to Yes all rows in a message are word wrapped to fit a 12-characters display. Word Wrapping is not used on pagings sent to storage rack and it's only optimized for 912/914/922 receivers.</fullHelpText>
                        </parameter>
                </group>

                <group name="Alarm Subscribing Modules">

                        <parameter name="Alarm Subscribing Module 1">
                                <!-- memoryAddress:0581 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>AlarmSubsc1</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>When this parameter is set, "Alarm blocks", "Generic data blocks with alarms" and "Input activity blocks" sent to the central will be distributed to the specified module. If no distribution is desired, bus and module address must be set to FF.&lt;br&gt;&lt;br&gt; Bus:&lt;br&gt; Specifies on which bus the module is located. Permitted values:&lt;br&gt; 00H = A-Bus&lt;br&gt; 01H = B-Bus&lt;br&gt; 03H = D-Bus&lt;br&gt; 04H = PC-Line&lt;br&gt; FFH = No distribution is desired.&lt;br&gt; Default: No distribution is desired.&lt;br&gt;&lt;br&gt; Module Address:&lt;br&gt; Module address of the alarm subscribing module.&lt;br&gt;&lt;br&gt; Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Alarm Subscribing Module 2">
                                <!-- memoryAddress:0586 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>AlarmSubsc2</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>When this parameter is set, "Alarm blocks", "Generic data blocks with alarms" and "Input activity blocks" sent to the central will be distributed to the specified module. If no distribution is desired, bus and module address must be set to FF.&lt;br&gt;&lt;br&gt; Bus:&lt;br&gt; Specifies on which bus the module is located. Permitted values:&lt;br&gt; 00H = A-Bus&lt;br&gt; 01H = B-Bus&lt;br&gt; 03H = D-Bus&lt;br&gt; 04H = PC-Line&lt;br&gt; FFH = No distribution is desired.&lt;br&gt; Default: No distribution is desired.&lt;br&gt;&lt;br&gt; Module Address:&lt;br&gt; Module address of the alarm subscribing module.&lt;br&gt;&lt;br&gt; Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Alarm Subscribing Module 3">
                                <!-- memoryAddress:058B -->
                                <!-- memoryLength:2 -->
                                <symbolicName>AlarmSubsc3</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>When this parameter is set, "Alarm blocks", "Generic data blocks with alarms" and "Input activity blocks" sent to the central will be distributed to the specified module. If no distribution is desired, bus and module address must be set to FF.&lt;br&gt;&lt;br&gt; Bus:&lt;br&gt; Specifies on which bus the module is located. Permitted values:&lt;br&gt; 00H = A-Bus&lt;br&gt; 01H = B-Bus&lt;br&gt; 03H = D-Bus&lt;br&gt; 04H = PC-Line&lt;br&gt; FFH = No distribution is desired.&lt;br&gt; Default: No distribution is desired.&lt;br&gt;&lt;br&gt; Module Address:&lt;br&gt; Module address of the alarm subscribing module.&lt;br&gt;&lt;br&gt; Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Alarm Subscribing Module 4">
                                <!-- memoryAddress:0590 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>AlarmSubsc4</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>When this parameter is set, "Alarm blocks", "Generic data blocks with alarms" and "Input activity blocks" sent to the central will be distributed to the specified module. If no distribution is desired, bus and module address must be set to FF.&lt;br&gt;&lt;br&gt; Bus:&lt;br&gt; Specifies on which bus the module is located. Permitted values:&lt;br&gt; 00H = A-Bus&lt;br&gt; 01H = B-Bus&lt;br&gt; 03H = D-Bus&lt;br&gt; 04H = PC-Line&lt;br&gt; FFH = No distribution is desired.&lt;br&gt; Default: No distribution is desired.&lt;br&gt;&lt;br&gt; Module Address:&lt;br&gt; Module address of the alarm subscribing module.&lt;br&gt;&lt;br&gt; Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Alarm Subscribing Module 5">
                                <!-- memoryAddress:0595 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>AlarmSubsc5</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>When this parameter is set, "Alarm blocks", "Generic data blocks with alarms" and "Input activity blocks" sent to the central will be distributed to the specified module. If no distribution is desired, bus and module address must be set to FF.&lt;br&gt;&lt;br&gt; Bus:&lt;br&gt; Specifies on which bus the module is located. Permitted values:&lt;br&gt; 00H = A-Bus&lt;br&gt; 01H = B-Bus&lt;br&gt; 03H = D-Bus&lt;br&gt; 04H = PC-Line&lt;br&gt; FFH = No distribution is desired.&lt;br&gt; Default: No distribution is desired.&lt;br&gt;&lt;br&gt; Module Address:&lt;br&gt; Module address of the alarm subscribing module.&lt;br&gt;&lt;br&gt; Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Alarm Subscribing Module 6">
                                <!-- memoryAddress:059A -->
                                <!-- memoryLength:2 -->
                                <symbolicName>AlarmSubsc6</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>When this parameter is set, "Alarm blocks", "Generic data blocks with alarms" and "Input activity blocks" sent to the central will be distributed to the specified module. If no distribution is desired, bus and module address must be set to FF.&lt;br&gt;&lt;br&gt; Bus:&lt;br&gt; Specifies on which bus the module is located. Permitted values:&lt;br&gt; 00H = A-Bus&lt;br&gt; 01H = B-Bus&lt;br&gt; 03H = D-Bus&lt;br&gt; 04H = PC-Line&lt;br&gt; FFH = No distribution is desired.&lt;br&gt; Default: No distribution is desired.&lt;br&gt;&lt;br&gt; Module Address:&lt;br&gt; Module address of the alarm subscribing module.&lt;br&gt;&lt;br&gt; Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Alarm Subscribing Module 7">
                                <!-- memoryAddress:059F -->
                                <!-- memoryLength:2 -->
                                <symbolicName>AlarmSubsc7</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>When this parameter is set, "Alarm blocks", "Generic data blocks with alarms" and "Input activity blocks" sent to the central will be distributed to the specified module. If no distribution is desired, bus and module address must be set to FF.&lt;br&gt;&lt;br&gt; Bus:&lt;br&gt; Specifies on which bus the module is located. Permitted values:&lt;br&gt; 00H = A-Bus&lt;br&gt; 01H = B-Bus&lt;br&gt; 03H = D-Bus&lt;br&gt; 04H = PC-Line&lt;br&gt; FFH = No distribution is desired.&lt;br&gt; Default: No distribution is desired.&lt;br&gt;&lt;br&gt; Module Address:&lt;br&gt; Module address of the alarm subscribing module.&lt;br&gt;&lt;br&gt; Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Alarm Subscribing Module 8">
                                <!-- memoryAddress:05A4 -->
                                <!-- memoryLength:2 -->
                                <symbolicName>AlarmSubsc8</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFF">
                                                <hexArrayPresentation maxLength="4" minLength="4"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>When this parameter is set, "Alarm blocks", "Generic data blocks with alarms" and "Input activity blocks" sent to the central will be distributed to the specified module. If no distribution is desired, bus and module address must be set to FF.&lt;br&gt;&lt;br&gt; Bus:&lt;br&gt; Specifies on which bus the module is located. Permitted values:&lt;br&gt; 00H = A-Bus&lt;br&gt; 01H = B-Bus&lt;br&gt; 03H = D-Bus&lt;br&gt; 04H = PC-Line&lt;br&gt; FFH = No distribution is desired.&lt;br&gt; Default: No distribution is desired.&lt;br&gt;&lt;br&gt; Module Address:&lt;br&gt; Module address of the alarm subscribing module.&lt;br&gt;&lt;br&gt; Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Distribute Alarms on the C-Bus">
                                <!-- memoryAddress:05A8-->
                                <!-- memoryLength:1 -->
                                <symbolicName>DistAlarmsCBus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No distribution">0</element>
                                                        <element name="Send Alarms on C-Bus">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt;When this parameter is set, "Alarm blocks" and "Generic data blocks with alarms" will be distributed on the C-bus to other centrals as broadcasts. This means that each of the centrals are responsible for further alarm distribution in their own system.</fullHelpText>
                        </parameter>

                        <parameter name="Distribute Input Activity Blocks on the C-Bus">
                                <!-- memoryAddress:05A9-->
                                <!-- memoryLength:1 -->
                                <symbolicName>DistInputBlocksCBus</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="No distribution">0</element>
                                                        <element name="Send Input Activity Blocks on the C-bus">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt;When this parameter is set, "Input activity blocks" will be distibuted on the C-bus to other centrals as broadcasts. This means that each of the centrals are responsible for further distribution according to the alarm distribution list within their own system.</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 1">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0600 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode1</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0604 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem1</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0605 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus1</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0606 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod1</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 2">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0610 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode2</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0614 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem2</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0615 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus2</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0616 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod2</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 3">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0620 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode3</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0624 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem3</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0625 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus3</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0626 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod3</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 4">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0630 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode4</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0634 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem4</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0635 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus4</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0636 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod4</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 5">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0640 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode5</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0644 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem5</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0645 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus5</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0646 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod5</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 6">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0650 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode6</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0654 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem6</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0655 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus6</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0656 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod6</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 7">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0660 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode7</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0664 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem7</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0665 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus7</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0666 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod7</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 8">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0670 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode8</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0674 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem8</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0675 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus8</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0676 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod8</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 9">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0680 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode9</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0684 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem9</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0685 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus9</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0686 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod9</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 10">

                        <parameter name="Short Code">
                                <!-- memoryAddress:0690 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode10</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:0694 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem10</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:0695 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus10</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:0696 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod10</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 11">

                        <parameter name="Short Code">
                                <!-- memoryAddress:06A0 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode11</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:06A4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem11</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:06A5 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus11</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:06A6 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod11</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 12">

                        <parameter name="Short Code">
                                <!-- memoryAddress:06B0 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode12</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:06B4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem12</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:06B5 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus12</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:06B6 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod12</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 13">

                        <parameter name="Short Code">
                                <!-- memoryAddress:06C0 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode13</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:06C4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem13</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:06C5 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus13</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:06C6 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod13</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 14">

                        <parameter name="Short Code">
                                <!-- memoryAddress:06D0 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode14</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:06D4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem14</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:06D5 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus14</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:06D6 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod14</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="Mobile To Base Short Code 15">

                        <parameter name="Short Code">
                                <!-- memoryAddress:06E0 -->
                                <!-- memoryLength:4 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ShortCode15</symbolicName>
                                <dataFormat>
                                        <string defaultValue="">
                                                <stringPresentation maxLength="4" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Normally all calls from a specific transceiver will be handled by the same module (e.g T941PX, T900KM, P940AI etc.). Optionally, calls can be directed to other modules depending on the dialled number or code (0-9, #, * and 'R').&lt;br&gt;&lt;br&gt; When a call is received from a transceiver, the central will check the table below to see if any short code was dialled. If the dialled data matches a short code, the call is transferred to the module specified for that short code. If no match was found, the call is transferred to the module that normally handles calls from that transceiver.&lt;br&gt;&lt;br&gt; Dialled data will be considered to match a short code if:&lt;br&gt;- The dialled data contains the complete short-code string.&lt;br&gt;- The short code is located first in the dialled data.&lt;br&gt;If the dialled data contains more data following the short code, it will still be a match.&lt;br&gt; Example: The short code '*9' will match the dialled data '*9', '*900', '*99' etc. but not the dialled data '*', '0*9', '1*99' etc. &lt;br&gt;&lt;br&gt;Up to four characters can be defined.Permitted characters: ASCII '0'-'9' and the three special characters '*', '#' and 'R'.</fullHelpText>
                        </parameter>

                        <parameter name="System address">
                                <!-- memoryAddress:06E4 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeSystem15</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies in which system the module is located. Set system address to FFH if the module is connected to this central. Permitted values:    00H-FFH</fullHelpText>
                        </parameter>

                        <parameter name="Bus">
                                <!-- memoryAddress:06E5 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeBus15</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="255">
                                                <enumPresentation>
                                                        <element name="A-bus">0</element>
                                                        <element name="B-bus">1</element>
                                                        <element name="D-bus">3</element>
                                                        <element name="PC-Line">4</element>
                                                        <element name="Not programmed">255</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Specifies on which bus the module is located. Permitted values:&lt;br&gt;00H = A-Bus&lt;br&gt;01H = B-Bus&lt;br&gt;03H = D-Bus&lt;br&gt;04H = PC-Line&lt;br&gt; FFH = Not programmed.</fullHelpText>
                        </parameter>

                        <parameter name="Module Address">
                                <!-- memoryAddress:06E6 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ShortCodeMod15</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FF">
                                                <hexArrayPresentation maxLength="2" minLength="2"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Module address of module that should receive the call. Permitted values: 01H-FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="System Error Parameters">

                        <parameter name="Local system error indication">
                                <!-- memoryAddress:0700-->
                                <!-- memoryLength:1 -->
                                <symbolicName>LocalErrorInd</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Global indication">0</element>
                                                        <element name="Local indication">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt;Set this parameter to 'Local indication' if only errors detected within this system are to be indicated by this central.&lt;br&gt;&lt;br&gt;Set this parameter to 'Global indication' if errors detected in any system are to be indicated by this central.</fullHelpText>
                        </parameter>

                        <parameter name="System error indication on lost module">
                                <!-- memoryAddress:0701-->
                                <!-- memoryLength:1 -->
                                <symbolicName>ErrorIndLostMod</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Do not indicate system error">0</element>
                                                        <element name="Indicate system error">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Set this parameter if system error is to be indicated when a module is lost.</fullHelpText>
                        </parameter>

                        <parameter name="System error indication on module status">
                                <!-- memoryAddress:0702-->
                                <!-- memoryLength:1 -->
                                <symbolicName>ErrorIndModStat</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Do not indicate system error">0</element>
                                                        <element name="Indicate system error">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Set this parameter if system error is to be indicated when a module reports an error status to the central.</fullHelpText>
                        </parameter>

                        <parameter name="Relay activation delay">
                                <!-- memoryAddress:0703 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ErrorIndRelayDelay</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="60">
                                                <decimalPresentation maxValue="255" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt; Delay between error detection and system error relay activation. Unit 10s.&lt;br&gt; Permitted values:  0 - 255 i.e. 0-2550 seconds.&lt;br&gt;Default: 60 i.e 10 minutes. </fullHelpText>
                        </parameter>

                        <parameter name="System error paging delay">
                                <!-- memoryAddress:0704 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ErrorIndPagingDelay</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="6">
                                                <decimalPresentation maxValue="255" minValue="0"/>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Delay between error detection and system error paging transmission. Unit 10s.&lt;br&gt; Permitted values:  0 - 255 i.e. 0-2550 seconds.&lt;br&gt;Default: 60 i.e 10 minutes. </fullHelpText>
                        </parameter>

                        <parameter name="Call number">
                                <!-- memoryAddress:0705 -->
                                <!-- memoryLength:4 -->
                                <symbolicName>ErrorIndCallNo</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="FFFFFFFF">
                                                <hexArrayPresentation maxLength="8" minLength="8"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>When a system error/OK is indicated, a paging is sent to this call number.&lt;br&gt; Note: If no call number is specified (all positions set to F), no pagings will be generated.</fullHelpText>
                        </parameter>

                        <parameter name="System error paging display message">
                                <!-- memoryAddress:0709 -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ErrorIndErrorMsg</symbolicName>
                                <dataFormat>
                                        <string defaultValue="SYSTEM ERROR">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Note: If the parameter 'Local system error indication' is set to 'local indication', it is recommended that the display message shows in which system the error is indicated, i.e. the system of this central.&lt;br&gt;&lt;br&gt; Permitted characters: ASCII characters according to IBM OEM.</fullHelpText>
                        </parameter>

                        <parameter name="Beep code for system error paging">
                                <!-- memoryAddress:0719 -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ErrorIndErrorBeep</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="5">
                                                <enumPresentation>
                                                        <element name="Beep code 1">1</element>
                                                        <element name="Beep code 2">2</element>
                                                        <element name="Beep code 3">3</element>
                                                        <element name="Beep code 4">4</element>
                                                        <element name="Beep code 5">5</element>
                                                        <element name="Beep code 6">6</element>
                                                        <element name="Beep code 7">7</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Beep code for system error paging</fullHelpText>
                        </parameter>

                        <parameter name="System OK paging display message">
                                <!-- memoryAddress:071A -->
                                <!-- memoryLength:16 -->
                                <!-- _fillStringsWithFF -->
                                <symbolicName>ErrorIndOKMsg</symbolicName>
                                <dataFormat>
                                        <string defaultValue="SYSTEM OK">
                                                <stringPresentation maxLength="16" minLength="0"/>
                                        </string>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Note: If the parameter 'Local system error indication' is set to 'local indication', it is recommended that the display message shows in which system the error is indicated, i.e. the system of this central.&lt;br&gt;&lt;br&gt; Permitted characters: ASCII characters according to IBM OEM.</fullHelpText>
                        </parameter>

                        <parameter name="Beep code for system ok paging">
                                <!-- memoryAddress:072A -->
                                <!-- memoryLength:1 -->
                                <symbolicName>ErrorIndOKBeep</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="1">
                                                <enumPresentation>
                                                        <element name="Beep code 1">1</element>
                                                        <element name="Beep code 2">2</element>
                                                        <element name="Beep code 3">3</element>
                                                        <element name="Beep code 4">4</element>
                                                        <element name="Beep code 5">5</element>
                                                        <element name="Beep code 6">6</element>
                                                        <element name="Beep code 7">7</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>Beep code for system OK paging</fullHelpText>
                        </parameter>

                        <parameter name="System error indication on lost PC-line">
                                <!-- memoryAddress:072B-->
                                <!-- memoryLength:1 -->
                                <symbolicName>ErrorIndLostPCLine</symbolicName>
                                <dataFormat>
                                        <decimal defaultValue="0">
                                                <enumPresentation>
                                                        <element name="Do not indicate system error">0</element>
                                                        <element name="Indicate system error">1</element>
                                                </enumPresentation>
                                        </decimal>
                                </dataFormat>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>(Not applicable for T942C/2)&lt;br&gt;Set this parameter if system error is to be indicated when PC-line is lost.</fullHelpText>
                        </parameter>

                </group>

                <group name="ASCII table for T900 pagings">
                        <parameter name="00H - 0FH">
                                <!-- memoryAddress:0800 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_00-0F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="2020202020202020202000200c0d2020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 00H - 0FH</fullHelpText>
                        </parameter>

                        <parameter name="10H - 1FH">
                                <!-- memoryAddress:0810 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_10-1F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="20202020202020202020202020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 10H - 1FH</fullHelpText>
                        </parameter>

                        <parameter name="20H - 2FH">
                                <!-- memoryAddress:0820 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_20-2F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="202122232425262728292a2b2c2d2e2f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 20H - 2FH</fullHelpText>
                        </parameter>

                        <parameter name="30H - 3FH">
                                <!-- memoryAddress:0830 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_30-3F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="303132333435363738393a3b3c3d3e3f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 30H - 3FH</fullHelpText>
                        </parameter>

                        <parameter name="40H - 4FH">
                                <!-- memoryAddress:0840 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_40-4F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="404142434445464748494a4b4c4d4e4f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 40H - 4FH</fullHelpText>
                        </parameter>

                        <parameter name="50H - 5FH">
                                <!-- memoryAddress:0850 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_50-5F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="505152535455565758595a5b5c5d5e5f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 50H - 5FH</fullHelpText>
                        </parameter>

                        <parameter name="60H - 6FH">
                                <!-- memoryAddress:0860 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_60-6F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="604142434445464748494a4b4c4d4e4f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 60H - 6FH</fullHelpText>
                        </parameter>

                        <parameter name="70H - 7FH">
                                <!-- memoryAddress:0870 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_70-7F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="505152535455565758595a5b5c5d5e7f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 70H - 7FH</fullHelpText>
                        </parameter>

                        <parameter name="80H - 8FH">
                                <!-- memoryAddress:0880 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_80-8F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="205e20205b205d202020202020205b5d">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 80H - 8FH</fullHelpText>
                        </parameter>

                        <parameter name="90H - 9FH">
                                <!-- memoryAddress:0890 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_90-9F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="202020205c202020205c5e2020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions 90H - 9FH</fullHelpText>
                        </parameter>

                        <parameter name="A0H - AFH">
                                <!-- memoryAddress:08A0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_A0-AF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="20202020202020202020202020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions A0H - AFH</fullHelpText>
                        </parameter>

                        <parameter name="B0H - BFH">
                                <!-- memoryAddress:08B0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_B0-BF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="20202020202020202020202020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions B0H - BFH</fullHelpText>
                        </parameter>

                        <parameter name="C0H - CFH">
                                <!-- memoryAddress:08C0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_C0-CF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="20202020202020202020202020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions C0H - CFH</fullHelpText>
                        </parameter>

                        <parameter name="D0H - DFH">
                                <!-- memoryAddress:08D0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_D0-DF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="20202020202020202020202020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions D0H - DFH</fullHelpText>
                        </parameter>

                        <parameter name="E0H - EFH">
                                <!-- memoryAddress:08E0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_E0-EF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="20202020202020202020202020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions E0H - EFH</fullHelpText>
                        </parameter>

                        <parameter name="F0H - FFH">
                                <!-- memoryAddress:08F0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiT900_F0-FF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="20202020202020202020202020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to T900 receivers. Table positions F0H - FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="ASCII table for T900 pagings with extended character set">
                        <parameter name="00H - 0FH">
                                <!-- memoryAddress:0900 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_00-0F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="20202020202020f9202000200c0d2020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 00H - 0FH</fullHelpText>
                        </parameter>

                        <parameter name="10H - 1FH">
                                <!-- memoryAddress:0910 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_10-1F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="f3f22020202020209e8e8f9f20202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 10H - 1FH</fullHelpText>
                        </parameter>

                        <parameter name="20H - 2FH">
                                <!-- memoryAddress:0920 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_20-2F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="202122232425262728292a2b2c2d2e2f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 20H - 2FH</fullHelpText>
                        </parameter>

                        <parameter name="30H - 3FH">
                                <!-- memoryAddress:0930 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_30-3F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="303132333435363738393a3b3c3d3e3f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 30H - 3FH</fullHelpText>
                        </parameter>

                        <parameter name="40H - 4FH">
                                <!-- memoryAddress:0940 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_40-4F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="404142434445464748494a4b4c4d4e4f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 40H - 4FH</fullHelpText>
                        </parameter>

                        <parameter name="50H - 5FH">
                                <!-- memoryAddress:0950 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_50-5F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="505152535455565758595a5b5c5d5e5f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 50H - 5FH</fullHelpText>
                        </parameter>

                        <parameter name="60H - 6FH">
                                <!-- memoryAddress:0960 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_60-6F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="606162636465666768696a6b6c6d6e6f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 60H - 6FH</fullHelpText>
                        </parameter>

                        <parameter name="70H - 7FH">
                                <!-- memoryAddress:0970 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_70-7F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="707172737475767778797a7b7c7d7e7f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 70H - 7FH</fullHelpText>
                        </parameter>

                        <parameter name="80H - 8FH">
                                <!-- memoryAddress:0980 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_80-8F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="857ee5837b917d952097962020205b5d">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 80H - 8FH</fullHelpText>
                        </parameter>

                        <parameter name="90H - 9FH">
                                <!-- memoryAddress:0990 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_90-9F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="e09282937c202020205c5e2020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions 90H - 9FH</fullHelpText>
                        </parameter>

                        <parameter name="A0H - AFH">
                                <!-- memoryAddress:09A0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_A0-AF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="90adbdd8988820202020a6aef0f7a18a">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions A0H - AFH</fullHelpText>
                        </parameter>

                        <parameter name="B0H - BFH">
                                <!-- memoryAddress:09B0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_B0-BF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="f8f12020202020202020a7afacab20a8">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions B0H - BFH</fullHelpText>
                        </parameter>

                        <parameter name="C0H - CFH">
                                <!-- memoryAddress:09C0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_C0-CF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="8180b6c78a20828586e0d287ded6d7aa">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions C0H - CFH</fullHelpText>
                        </parameter>

                        <parameter name="D0H - DFH">
                                <!-- memoryAddress:09D0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_D0-DF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="d188202020202020849c8b99208d9d20">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions D0H - DFH</fullHelpText>
                        </parameter>

                        <parameter name="E0H - EFH">
                                <!-- memoryAddress:09E0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_E0-EF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="919020c62020929596e5209720942020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions E0H - EFH</fullHelpText>
                        </parameter>

                        <parameter name="F0H - FFH">
                                <!-- memoryAddress:09F0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>AsciiExt900_F0-FF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="d09820a2202020f69420a32020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings to receivers with extended character set. Table positions F0H - FFH</fullHelpText>
                        </parameter>

                </group>

                <group name="ASCII table for 912/914/922/a71/p71 pagings">
                        <parameter name="00H - 0FH">
                                <!-- memoryAddress:0B00 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_00-0F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="2020202020202020202000200C0D200F">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 00H - 0FH</fullHelpText>
                        </parameter>

                        <parameter name="10H - 1FH">
                                <!-- memoryAddress:0B10 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_10-1F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="20202020202020202020202020202020">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 10H - 1FH</fullHelpText>
                        </parameter>

                        <parameter name="20H - 2FH">
                                <!-- memoryAddress:0B20 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_20-2F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="202122232425262728292a2b2c2d2e2f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 20H - 2FH</fullHelpText>
                        </parameter>

                        <parameter name="30H - 3FH">
                                <!-- memoryAddress:0B30 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_30-3F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="303132333435363738393a3b3c3d3e3f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 30H - 3FH</fullHelpText>
                        </parameter>

                        <parameter name="40H - 4FH">
                                <!-- memoryAddress:0B40 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_40-4F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="404142434445464748494a4b4c4d4e4f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 40H - 4FH</fullHelpText>
                        </parameter>

                        <parameter name="50H - 5FH">
                                <!-- memoryAddress:0B50 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_50-5F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="505152535455565758595a5b5c5d5e5f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 50H - 5FH</fullHelpText>
                        </parameter>

                        <parameter name="60H - 6FH">
                                <!-- memoryAddress:0B60 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_60-6F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="606162636465666768696a6b6c6d6e6f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 60H - 6FH</fullHelpText>
                        </parameter>

                        <parameter name="70H - 7FH">
                                <!-- memoryAddress:0B70 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_70-7F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="707172737475767778797a7b7c7d7e7f">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 70H - 7FH</fullHelpText>
                        </parameter>

                        <parameter name="80H - 8FH">
                                <!-- memoryAddress:0B80 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_80-8F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="808182838485868788898A8B8C8D8E8F">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 80H - 8FH</fullHelpText>
                        </parameter>

                        <parameter name="90H - 9FH">
                                <!-- memoryAddress:0B90 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_90-9F</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="909192939495969798999A9B9C9D9E9F">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions 90H - 9FH</fullHelpText>
                        </parameter>

                        <parameter name="A0H - AFH">
                                <!-- memoryAddress:0BA0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_A0-AF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="A0A1A2A3A4A5A6A7A8A9AAABACADAEAF">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions A0H - AFH</fullHelpText>
                        </parameter>

                        <parameter name="B0H - BFH">
                                <!-- memoryAddress:0BB0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_B0-BF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="B0B1B2B3B4B5B6B7B8B9BABBBCBDBEBF">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions B0H - BFH</fullHelpText>
                        </parameter>

                        <parameter name="C0H - CFH">
                                <!-- memoryAddress:0BC0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_C0-CF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="C0C1C2C3C4C5C6C7C8C9CACBCCCDCECF">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions C0H - CFH</fullHelpText>
                        </parameter>

                        <parameter name="D0H - DFH">
                                <!-- memoryAddress:0BD0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_D0-DF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="D0D1D2D3D4D5D6D7D8D9DADBDCDDDEDF">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions D0H - DFH</fullHelpText>
                        </parameter>

                        <parameter name="E0H - EFH">
                                <!-- memoryAddress:0BE0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_E0-EF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="E0E1E2E3E4E5E6E7E8E9EAEBECEDEEEF">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions E0H - EFH</fullHelpText>
                        </parameter>

                        <parameter name="F0H - FFH">
                                <!-- memoryAddress:0BF0 -->
                                <!-- memoryLength:16 -->
                                <symbolicName>Ascii912/914/922/a71/p91_F0-FF</symbolicName>
                                <dataFormat>
                                        <hex defaultValue="F0F1F2F3F4F5F6F7F8F9FAFBFCFDFE20">
                                                <hexArrayPresentation maxLength="32" minLength="32"/>
                                        </hex>
                                </dataFormat>  
                                <groupType>S</groupType>
                                <serviceUserAccess>ReadWrite</serviceUserAccess>
                                <adminUserAccess>ReadWrite</adminUserAccess>
                                <commonUserAccess>ReadWrite</commonUserAccess>
                                <shortHelpText></shortHelpText>
                                <fullHelpText>ASCII table used for pagings sent with 912/914/922/a71/p71 character set. Table positions F0H - FFH</fullHelpText>
                        </parameter>

                </group>
        </parameters>
</parameter_def>

