Note that in Version 11r1 there are no test licenses any more! They are replaced by the test mode, see Reference11r1:General/License for details.

Please note that there is (as in V10) no 11r1 support for IP600, IP1500, IP3000, IP3000DD, IP21, IP400, IP202 and IP200 (the old one, not IP200A, see label on the back). There is only limited 11r1 support for IP110, IP200A, IP230, IP240 (there are new models IP110A, IP240A though with full support for 11r1).

Note: use V10 Linux Application Platform and its applications for 11r1 installations!

If you cannot find the application download your are looking for, the reason is most likely that the application you are interested in was originally released based on a previous firmware version. See wiki.innovaphone.com: Howto:Download_Server_Structure.

Please note! Important note regarding provisioning!
Starting with version 10, innovaphone devices connect automatically with http://config.innovaphone.com/init during commissioning or after restoring factory settings. This process serves to simplify provisioning. A connection is always established automatically to http://config.innovaphone.com/init. If you would like to avoid this procedure, the innovaphone device must be booted in an environment without a public internet connection. For more information about provisioning possibilities, see: Reference10:Concept_Provisioning. The following information is transmitted to innovaphone upon connection with http://config.innovaphone.com/init: The version and serial number of the device and the public IP address. This information is managed in accordance with innovaphone's data protection policy.